main pic dereza front suspension with caps
dereza kit main, right and front views _less version
front suspension to xiaomi electric scooter ninebot too
dereza 112-144 mm kit front suspension fro xiaomi scooter
dereza and konyk suspensions
dereza front suspension
front suspension to xiaomi electric scooter ninebot too
front suspension to xiaomi electric scooter ninebot too
a welding seam of the dereza traverse part
dereza dropout
Sold out!

Derezа front suspension

12.0 $ – 98.0 $

Dereza front suspension to Xiaomi electric scooters for model: m365, 1S, Pro, Pro2 models.
Plug and play system. Front suspension lever type.
It should be noted that this kit comes without a shock absorber. (We do not produce any shock absorbers)

air shock - lex1.store

Parameters for air shock absorbers:

– 125mm(for 50-75 kg riders), 150mm, 165 mm too;
– single-chamber, double-chamber;
– pump up to your weight (160-200 PSI for 80 kg).

spring shock lex1store

Parameters for spring shock absorbers:

– from 750 to 1400 lbs (50-100 kg);
– 125mm, 150mm, 165mm;

spring shock lex1store

Parameters for oil spring shock absorbers:

– 650 – 850 lbs ( 65-85 kg);
– 150mm;

  • standard dereza kit
  • wider levers dereza kit 114 mm
  • left and right plastic caps

Description

Dereza front suspension is designed for a 125 mm, 150 mm shock absorber, type shock: for compression. A minimum 1000 lbs spring shock can be installed.The best shock absorption effect can be achieved by installing a single-chamber or double-chamber air shock.

Incoming parts Dereza

By this time, on March 28, 2023, this suspension construction is already completely tested and some problems have been corrected.The initial version of the suspension was able to install only one type of shock absorber, namely 125 mm. Now you can use shock absorbers with wheelbase sizes of 125, 150 mm. For this, two corresponding holes are provided in the suspension arms. The geometry of the traverse and levers has been partially changed. See the update information section.

Video tutorial how to install

Dereza suspension advantages

  • excellent scheme suspension amortization
  • crossover, high clearance
  • a wide range of hardness and softness settings for different tasks
  • the possibility of changing only the levers from standard ones to wider ones
  • use of a solid joint, needle bearings, and maximum protection against dirt and dust entering the bearing chamber
  • plug&play
  • the positive emotions you will get while riding are about 10 times more than the cost of this suspension
  • looks aesthetic and pleasant

If the dereza suspension is not available, write here

Additional information

Weight 1650 g
Dimensions 25 × 10 × 10 mm
color

black matte
material

2024, sheet steel 3 mm, sheet steel 4 mm
coating

galvanization + powder paint
dereza kit options

standard dereza kit, wider levers dereza kit 114 mm, left and right plastic caps

recent updates as of 14-Jan-24

  • Engine support special washers were added to the wide kit.
  • As a protective layer against corrosion, the galvanic process of tinning is used, and then as usual: priming and paint
  • Finally made it possible to fit the mudguard when using the 150 shock thanks to a modified bracket and some changes to the levers

recent updates as of 14-Aug-23

  • The traverse part was strengthened to withstand greater loads
  • The aluminum plate was replaced with a steel one. In this way, a welding seam is introduced
  • Increased the thickness of the support washer and replaced the m4 bolt with an m5 bolt with a countersunk head
  • Specified positions of shock absorbers on levers, especially for 150 mm
  • It became easier to install the motor wheel on the levers
  • Assembling the Dereza suspension became much easier, because the wishes of the first users were taken into account
  • The dereza suspension comes pre assembled and with oil inside the bearing chamber

WARNING. Levers must be printed in such a position as shown in the picture.
3d models of caps for suspension levers, right and left. A total of 8 files, 4 files of stl format, and 4 files of graphic images of models

download 3d caps models of the base Dereza levers (right/left)↓ 1.53MB – 8 files

Instal and driving of Dereza Front Suspension

Factory fork disassembly, front suspension assembly, spring and air shock work demonstration in Dereza front suspension.

WARNING! This is an outdated video, the design has changed slightly for the new suspension models, but the basic assembly principles are shown.
https://www.youtube.com/results?search_query=dereza+front

You may also like…

Related products